DO88.se Turbo Intake Pipe Kit with Carbon Fibre Cover

To fit: 3.0 Litre T6  and T6 AWD inc Polestar petrol turbo

• Engines type codes B6304T2,4 or 5
• S80II 2008-2015

This kit is for you that have high horsepower goals and want to upgrade to the absolute best!

Our turbo inlet pipe has better air flow than the stock pipe. This is verified by our own SuperFlow SF-1020 flow bench. Our turbo intake pipe is 76mm (3 inch), outer diameter, all the way to eliminate all restrictions.

1. do88 turbo inlet pipe has an air flow at 0,125bar/1,81psi pressure drop 669CFM, compared to the OEM pipe that has 594CFM.
2. The turbo inlet pipe is manufactured in 3” mandrel bent seamless aluminium pipe.
3. Custom made high quality silicone hoses with 4 layers of polyester reinforcement and steel wire.

These hoses can handle very high temperature and vacuum!

Always remember that the OEM turbo inlet pipe and hoses was designed for the power level the car was built for originally. A power increase, or even very hard use of the car in a standard version, may cause that the OEM pipe and hoses don’t have the performance you need. So only after engine software tuning do88 pressure pipes will give a performance increase over the OEM pipes!

The do88 3" turbo inlet pipe comes with all hardware necessary for installation.

Included parts in this kit: 

1. 3" Aluminium turbo inlet pipe
2. Carbon fiber engine cover 
3. Installation hardware for inlet pipe, hoses and engine cover 
4. Four silicone hoses 
5. Six stainless steel hose clamps

Supplied with a choice of black, blue or red hoses. Please select using the drop down menu when ordering.

Equivalent Volvo part numbers 31338460, 30757872 (for cross reference only)